Click image to view full size image
According to the performance, pliers can be divided into: clamp and twist type; shear type; Clamp-torsion shear type. According to the type of type, it can be divided into: hydraulic tongs; crimping pliers; hydraulic wire cutters; wire strippers; Cordless hydraulic cable clamps. According to the shape, it can be divided into: pointed mouth; Flat mouth; round mouth; curved mouth; oblique mouth; needle nozzle; top cutting; wire cutters; gill pliers, etc. According to the use, it can be divided into: DIY, industrial grade pliers, special pliers, etc. According to the structural form, it is divided into two types: piercing gills and stacked gills.
| Overall length: | 180mm |
| Pliers Length: | 45mm |
| Handle Width: | 50mm |
| Opening Range: | 40mm |
| Weight: | 170g |
| Product Name: | Forceps: |
| Product Model: | DL2001 |
| Specifications: | 10 inches |
| Edge hardness: |
45-48HRC |
| Material: | High-carbon steel |
| Name of article: | Wire cutters |
| Overall length: | 200MM |
| Weight: | 285G |
| Specification: | 8 |
| Jaw width: | 30MM |
| Handle Width: | 55MM |
| Maximum opening: | 8 |
| Total length of pipe wrench: | 50cm |
| Overall width of the pipe wrench: | 9.8cm |
| Maximum opening: | 10cm |
| Product Weight: | 2.47KG |
| Product Name: | Needle-nose pliers |
| Product Code: | DL2106 |
| Specifications: | 6 |
| Product Size: | 165mm |
| Shear Life: | More than 5000 times |
| Material: | 55# carbon steel |
| Opening Range: | 33mm |
| Total length of pipe wrench: | 19.5cm |
| Overall width of the pipe wrench: | 5.3cm |
| Maximum opening: | 4.5cm |
| Product Weight: | 0.39KG |
Wire cutters are composed of a pliers head and a handle, and the pliers include jaws, teeth, knife edges, and guillotines. The functions of each part of the pliers are:
(1) the tooth mouth can be used to tighten or loosen the nut;
(2) The knife edge can be used to cut the rubber or plastic insulation layer of soft wires, and can also be used to cut wires and wires;
(3) The guillotine can be used to cut hard metal wires such as wires and steel wires;
(4) The insulated plastic pipe of the pliers has a withstand voltage of more than 500V, with which it can be charged to cut the wire.
In daily use, do not litter. so as not to damage the insulated plastic pipe. Commonly used wire cutters for electricians are available in 150mm, 175mm, 200mm and 250mm specifications.
Needle-nose pliers are also called manicure pliers, needle-nose pliers are mainly used to cut single-strand and multi-strand wires with thin wire diameter, as well as to bend the single-strand wire joint, strip plastic insulation, etc., needle-nose pliers are also one of the commonly used tools for electricians (especially internal electricians). It consists of a pointed tip, a knife edge, and a tong handle. The handle of the needle-nose pliers for electricians is covered with an insulating sleeve with a rated voltage of 500V. Due to the sharp head, the operation method of bending the wire joint with the needle nose pliers is to first fold the wire head to the left, and then bend it to the right in a clockwise direction against the screw.
Wire strippers are internal line electricians, which are one of the commonly used tools for motor repair and instrumentation electricians in people's daily life. It is composed of a knife edge, a crimping edge and a clamp handle. The handle of the wire stripper is covered with an insulating sleeve with a rated working voltage of 500V. Wire strippers are also suitable for stripping plastic wires, rubber insulated wires, and cable cores.
Q: What is the difference between fine wire cutter and ordinary wire cutter?
A: Better material (e.g. chrome-vanadium steel), higher hardness, strong wear resistance, tight jaw bite, more precise shearing, and non-slip handles, significantly improved durability.
Q: How to maintain high-quality wire cutters?
A: Wipe off stains and apply anti-rust oil after use; Avoid shearing hard materials (e.g. rebar); Store in a dry place to prevent rust or loose parts.
Q: What scenarios are high-quality wire cutters suitable for?
A: It is suitable for electrical wiring, home maintenance, handicraft, industrial assembly, etc., and can cut wires, cables, bend wires or clamp parts.
https://www.yijiatool.com/